| Maximum lifting height | 2.7 m |
|---|---|
| Lifting capacity inside / extended | 280 / 160 kg |
| Machine height | 1,52 m |
| Machine width (min) | 0,63 m |
| Machine length (min) | 2,17 m |
| Extension arm | 0,5 m |
| Page offset | 0,1 m |
| The tip from the horizontal | 50˚ back / 50˚ front |
| Speeds | Stepless high / low |
| Vacuum system | 2 circuits |
| Battery charger | 230V |
| Integrated charger | Cetek XT 14000 |
| Charging time | Ca. 8 hours |
| Battery | 24 volts (2 x 12 V) / 2×60 Ah |
| Battery life | 10 hours |
| Rear wheel drive | 700 W DC |
| Brake | Electronic |
| Suction cups | 4 x Ø300mm |
| Weight | 470 kg |
| Dimensions | 140 × 73 × 132 cm |
Smartlift Industry (SLI)
Smartlift Industry are self-propelled machines with great versatility. Attach the tools you need for the job and switch back again in seconds. The machines are very robust and therefore well suited for heavier repetitive lifting.
Typical tools that can be attached are e.g. hook or pallet fork. The industrial models are specified without the vacuum system and yoke found on the glass elevator model.
The Smartlift SLI comes in the following versions:
SLI 208 – 200kg
SLI 250 – 250kg
SLI 408 – 430kg
SLI 608 – 600kg
Call for Price
Send RequestUsing a Smartlift extends your working range compared to traditional ‘pallet lifters’ – both horizontally and vertically. The compact design extends your reach e.g. when reaching further on a deep shelf or when lifting items horizontally from the ground. Vertically, you can reach higher than standard lifting equipment.
Every Smartlift is compact in size and has a narrow width, making it possible to maneuver in tight spaces. Driving and operating a Smartlift is both intuitive and comfortable. The proportional speed handles give you full control of the machine. The combination of compact size, greater reach horizontally and lifting height vertically is the core strength of these machines.